Description

5″ High pressure select tester valve DST tools

Product Description

Payment & Shipping Terms Supply Capacity
Unit Price: 1000.0 USD Production Capacity: 1set/month
Trade Term: FOB,CFR Packing: plywood
Payment Terms: L/C, T/T Delivery Date: 30days
Min. Order: 1 Set/Sets
Means of Transport: Ocean, Air, Land

5″ High pressure select tester valve  DST tools

DST tools select tester valve Drill stem testing tools

This tool has the capabilities of taking multiple downhole closures where pipe manipulation is restricted and a full opening string is desired. This tool has the same basic features of the 15K LPR-N Tester Valve plus additional features that include:

Ø The ability to lock the ball valve in the open position at any point during the test.

Ø The ability to reactivate the tool for normal operations.

The select tester valve is composed of four basic sections; ball valve section, upper hydraulic section, nitrogen section and the metering section.

The ball valve section contains the ball valve and the mechanism that rotates the ball when the tool is activated; the ball is rotated to the open position allowing the reservoir to flow into the testing string.

The upper hydraulic section is contained between the upper annulus ports and the nitrogen filler valve. The critical part of this section is the metering (power) cartridge and selector.

The nitrogen section is composed of the nitrogen case, nitrogen mandrel, floating piston and nitrogen filler valve. The nitrogen acts as an adjustable spring and provides the force needed to close the ball valve. The nitrogen section is charged at the surface to a predetermined pressure according to surface temperature, bottom hole temperature and hydrostatic pressure. These values do not have to be exact because the floating piston allows the tool to compensate for small inaccuracies (approximately 10%).

The metering section is composed of the lower oil chamber, metering cartridge and floating piston. The oil in this section acts as a barrier between the tool and the annular fluid. This insures that only clean fluid passes through the metering cartridge.

NO. Specification 5″
1 OD 5″(127mm)
2 ID 2.25″(57mm)
3 Length(mm) 288.2″(7319.5mm)
4 Working pressure 15000 PSI(105Mpa)
5 Maximum open pressure differential 5000PSI(35Mpa)
6 Tensile strength(Yield) 2020.5kN
7 Internal Pressure Strength 151Mpa
8 External Pressure Strength 141Mpa
9 Torque strength 30.9kN.m
10 Service Environment Mud, crude oil, natural gas with H2S, Apply to NACE MR0175-2003
11 End connection 3 7/8CAS. BXP, 3 1/2 IF BXP
12 Service temperature -20oF~400oF