Description

Cased Hole Drill stem testing tools 5″ RD Safety Circulating Valve

Product Description

Payment & Shipping Terms Supply Capacity
Unit Price: 1000.0 USD Production Capacity: 10sets/month
Trade Term: FOB,CFR Packing: plywood
Payment Terms: L/C, T/T Delivery Date: 35days
Min. Order: 1 Set/Sets
Means of Transport: Ocean, Air, Land

Cased Hole Drill stem testing tools 5″ RD Safety Circulating Valve

5″ RD Safety Circulating Valve for cased hole Drill stem testing

Brief introduction

The rupture disk (RD) safety circulating valve functions as both a safety valve and circulating valve. The tool functions as a safety valve when the annulus pressure reaches a predetermined value. At that pressure, the valve isolates the workstring below the tool and establishes communication between the annulus and the workstring above the tool. This tool converts into a circulating valve when the ball valve section is removed and attach a lower adapter called RD Circulating Valve.

The valve can not be open when closed in downhole operation.

RD Circulating valve is the same as RD Safety circulating valve except short of ball valve section, the annulus pressure made RD burst and the pressure goes into RD hole and push circulating mandrel forward, then open the circulating ports.

Features and Benefits (RD Safety circulating valve)

The tool is composed of three major sections:

1. The power section consists of a power mandrel case and rupture disk that is available for a wide range of pressure applications. The rupture disk bursts at a predetermined pressure, allowing annulus pressure to be applied to a differential area on the power mandrel. The power mandrel moves down, first pushing the ball valve closed, and then opening a set of circulating ports.

2. The circulating section consists of a set of ports that are initially sealed by the power mandrel. When the rupture disk bursts, the power mandrel moves down, exposing the ports that allow communication between the annulus and workstring.

3. The safety valve consists of a ball valve, operating pins, and collet fingers. As the power mandrel moves down, the operating arms close the ball valve. The collet fingers expand, allowing the power mandrel to continue traveling down to open the circulating ports

Specification

No Specification 5″ RD Safety circulating valve 5″ RD Circulating valve
1 O.D. 127.5mm 127.5mm
2 Bore Diameter 57mm 57mm
3 Length 1843mm 1220mm
4 Working pressure 105Mpa 105Mpa
5 Internal pressure strength 140Mpa 139Mpa
6 External pressure strength 130Mpa 120Mpa
7 Tensile strength 2337KN 2139KN
8 Torque strength 61KN.m 61KN.m
9 Service H2S,NACE MR0175(>175oF) H2S,NACE MR0175(>175oF)
10 Working temperature -29oC+204oC -29oC+204oC
11 Connection thread 3 7/8CAS. BXP or 3 1/2 IF.BXP 3 7/8CAS. BXP or 3 1/2 IF.BXP

Packer,circualting valve,select tester valve,APR N-valve,OMNI valve,Hydraulic Jar,Tubing string tester

1. Full bore Packer, 7″ Casing, working pressure 70Mpa, Working Temperature 400F, Connection: IF, 4set

2. Tester valve, 5″, Working pressure 105Mpa, Working temperature 400F, Connection CAS. BXP, 4 sets

3. Hydraulic Jar,5″, Working pressure 105Mpa, Working temperature 400F, Connection CAS. BXP, 4sets

4. Rupture disk Circulating valve, 5″, Working pressure 105Mpa, Working temperature 400F, Connection CAS. BXP, 4sets

5. Flowhead (surface test tree), 3 1/16″, working pressure 70 Mpa. 1set

Should you have any interest or inquiry on the Drill stem testing tools, contact us freely.