Description

Slip type elevator

 

CAMTOP offers “Y” center latch, slip type manual elevators for tubing (YT, MYT) and casing (YC, HYC, MYC). The elevators hoist a variety of small casing and tubing with the proper size slips and slip setting ring installed. The slips are easily changed. The elevator is designed with two (2) halves of similar weights for good balance and easier opening and closing. A guarded operating latch and an extra handle at the rear of the elevator allow for easier, safer operation. Elevators are equipped with a latch and latch lock combination. To open, pull the latch lock handle out and swing the elevator apart. The latch and latch lock secures automatically when the elevator is closed around the pipe. The load causes the slips to set when the elevator is raised, pushing down on the slip setting ring.

Ensure all slip inserts are free in the up position when latching the elevator

Technical data for slip type elevators

Slip type elevator Specifications Length of inserts contact to pipes Slips for inserts size range Inserts for slips Qty of inserts for each size
HYC 3½”~7⅝”/200ton 10½” 3½”~4½” 3½”or 4″ or 4½” 24
5″~5½” 5″ or 5½” 36
6⅝”~7″ 6⅝” or 7″ 48
7⅝” 7⅝” 48
MYC 3½”~7″/125ton 7″ 3½”~4½” 3½”or 4″ or 4½” 16
5″~5½” 5″ or 5½” 16
6⅝”~7″ 6⅝” or 7″ 24
YC 3½”~7″/75ton 7″ 3½”~4½” 3½”or 4″ or 4½” 16
5″~5½” 5″ or 5½” 16
6⅝”~7″ 6⅝” or 7″ 24
HYT 2⅜”~3½”/150ton 12″ 2⅜”~2⅞” 2⅜” or 2⅞” 16
2⅞”~3½” 2⅞” or 3½” 32
YT 1.315″~3½”/75ton 9″ 1.315″~2⅞” 1.315 or 1.660 or 1.900 or 2″ or 21/16 or 2⅜” or 2⅞” 12
2⅞”~3½” 2⅞” or 3½” 24